Home > Intro to Classroom Technology (High, South and North) > Document Camera (Elmo TT-02RX)
Complete Manual for Document Camera (Elmo TT-02RX)
No manual available for ImageMate software; use Help within the program.
Things You Can Do With Your Document Camera
Uses-Helpful Websites and Video
Document Camera / ImageMate Software
Turning On
To turn on, press the power button located on the base for approximately 2 seconds or use the power button on the remote control. The document camera is on when the power button is blue.
Always turn off the document camera when not in use. To turn off, press the power button on the base of the player for approximately 2 seconds or use the power button on the remote control. When the document camera is off, the poer putton will be red.
Press the button on the end of the camera head to automatically focus in on what you are viewing. There is also an auto focus button on the remote control that you can use. If the auto focus does not produce the results you want/need, you can use manual focus; for more information on using this function, refer to page 51 in the Instruction Manual.
To zoom in and out, rotate the zoom dial or press the zoom buttons on the remote control.
Use the light as needed to enhance what you are viewing.
Cautions:
The camera head can be rotated to shoot walls, distance views (i.e. into the classroom). Gently rotate the camera head to shoot the area you want.
Caution: Never carry the document camera by the camera head; instead, move the document camera by picking it up at the base.
Brightness can be adjusted by using the controls on the base of the document camera or by using the buttons on the remote.
Use the controls on the base to switch from computer to document camera to SD card.
View the controls (operating panel).
More information can be found in the manual on page 54.
View the remote control tools.
If you want to draw attention to a particular section of your image, use the highlight function. To turn off the highlight function, press the button again.
Use the mask function to cover your document and reveal portions as you want. To turn off the mask function, press the button again.
The scroll function will zoom in on your document. You can then use the arrow buttons to scroll to different sections of your document. To turn off the scroll function, press the button again.
The picture-in-picture function displays a quarter-size still image of the document you are currently viewing. You can now remove that document and place another document on the stage. Both the previous and current images are now displayed. To turn off the picture-in-picture function press the button again.
Turn the wall control on and select Doc Cam input.
Turn the document camera on.
Turn the light on if desired.
Place your document on the stage under the document camera head.
You can use the magnetic strip to secure the document to the stage area.
You can use the anti glare sheet over your document to reduce glare (place dull side up).
Adjust the column and camera head to display your 3-D image.
The VGA cable attached to the back of the document camera has an audio cable.
Plug the audio cable into your Mp3 device (iPhone, iPod, etc.).
Do NOT turn the document camera on. Leave it off.
Do NOT to turn the wall plate on. Leave it off.
Select Doc Cam on the wall plate.
You should now be able to play music stored on your device.
You can control the volume both on your device and at the wall plate.
View Complete manual for Elmo TT-02RX Document Camera
Click the link directly above to view the complete manual; please be patient as this might take a minute or so to display on your screen.
If you are not able to find the instructions you need, please submit a HelpDesk ticket and the tech department will provide assistance to you.
Refer to pages 64-65 of the manual for common problems or submit a HelpDesk ticket for assistance.
The document camera should be connected to your computer with a gray cord.
Turn the document camera on.
Double-click on the ImageMate icon on your desktop.
If this is the first time you are using the ImageMate software, you may need to complete a wizard. Simply click Next, Next, and Finish.
You are now ready to use your ImageMate software.
The opening screen will look like this...
ImageMate v2.0 software (used in conjunction with the document camera to capture still images and video).
For additional help, use the Help icon in the ImageMate software.
There, you will be able to find the following information and more: